 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CX6VSM CRYSTAL 18 kHz to 600 kHz TM Ultra-Low Profile (1mm) Miniature Surface Mount Quartz Crystal for Pierce Oscillators DESCRIPTION The CX6VSM quartz crystals are leadless devices designed for surface mounting on printed circuit boards or hybrid substrates and intended to be used in Pierce oscillators.They are hermetically sealed in a rugged, miniature ceramic package. They are manufactured using the STATEKdeveloped photolithographic process, and are designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. Maximum process temperature should not exceed 260OC. FEATURES actual size side view Glass Lid Shown PACKAGE DIMENSIONS D A TOP BOTTOM Miniature tuning fork design Ultra-low profile (1mm) High shock resistance Designed for low power applications Compatible with hybrid or PC board packaging Low aging Full military testing available Ideal for battery operated applications Designed and manufactured in the USA EQUIVALENT CIRCUIT B C D TYP. DIM A B C D DIM "C" MAX SM1 SM2 SM3 inches 0.265 0.103 0.050 mm 6.73 2.62 1.27 inches 0.280 0.114 0.060 MAX. mm 7.11 2.90 1.52 see below GLASS LID inches 0.039 0.041 0.044 mm 0.99 1.04 1.12 CERAMIC LID inches 0.053 0.055 0.058 mm 1.35 1.40 1.47 C0 1 L1 C1 R1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance SUGGESTED LAND PATTERN 0.070 (1.78) CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT Rf BUFFER OSC Freq (fO ) AMPLIFIER 0.120 (3.05) RA CG inches (mm) 0.215 (5.46) CX6 CX-6 CD 10132 - Rev B S YS TEM CERTIFIC AT N IO STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com IS O 90 01 SPECIFICATIONS FIGURE 1 CX6V TYPICAL MOTIONAL RESISTANCE (R1) * Tighter frequency calibration available. ** Other turning point available. *** Higher shock and vibration available. (in 1000's) Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Frequency Range 18 kHz to 600 kHz Functional Mode Tuning Fork (Flexure) Standard Calibration Tolerance* (see table below) Motional Resistance (R1) See Figure 1 MAX: 18-25 kHz, 2x Typ 25-600 kHz, 2.5x Typ Motional Capacitance (C1) Figure 2 Quality Factor (Q) Figure 3 MIN is 0.25x Typ 1.4 pF Shunt Capacitance (C0) Drive Level 18-25 kHz 0.5 W MAX 25-600 kHz 1.0 W MAX Turning Point (T )** Figure 4 0 Temperature Coefficient (k) -0.035 ppm/0C2 Aging, first year 5 ppm MAX Shock, survival** 1,500 g peak, 0.3 ms, 1/2 sine Vibration, survival** 10 g RMS, 20-2,000 Hz random Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. 300 200 100 50 R1(k ) 20 10 5 2 18 50 100 200 600 Frequency (kHz) FIGURE 2 CX6V TYPICAL MOTIONAL CAPACITANCE (C1) 5 C1(fF) 2 1.0 0.5 18 50 100 200 600 Frequency (kHz) FIGURE 3 CX6V TYPICAL QUALITY FACTOR (Q) 300 200 100 50 CX6V Standard Calibration T olerance at 25OC 20 18 50 100 200 600 Frequency Range (kHz) 18-74.9 30 ppm (0.003%) + _ + _ FIGURE 4 CX6V TYPICAL TURNING POINT TEMP (T0) . Frequency (kHz) 75-169.9 50 ppm (0.003%) + _ + _ 170-249.9 + _ 250-600 + _ 100 ppm (0.01%) 200 ppm (0.02%) 200 ppm (0.02%) 500 ppm (0.05%) 100 ppm (0.01%) 100 ppm (0.01%) + _ 1000 ppm (0.1%) + _ 1000 ppm (0.1%) + _ 2000 ppm (0.2%) + _ 5000 ppm (0.5%) O + _ + _ +80 +70 +60 +50 +40 +30 +20 +10 0 -10 -20 TO( C) 18 50 100 200 600 Load Capacitance (CL), Used to Calibrate CX6V (other CL available) Frequency (kHz) Note: Frequency f at temperature T is related to frequency f0 at turning point temperature T0 by: f-f0 2 = k(T-T0) Frequency Load Range Capacitance (kHz) (pF) 18-24.9 25-54.9 55-100.0 10 9 8 Frequency Range (kHz) 100.1-179.9 180-600 Load Capacitance (pF) 5 4 f0 TERMINATIONS HOW TO ORDER CX6VSM CRYSTALS CX6V S C SM1 32.768K , Frequency K = kHz Designation SM1 SM2 SM3 Termination Gold Plated Solder Plated Solder Dipped 100 Calibration Tolerance @ 25OC (in ppm) / M PACKAGING OPTIONS Blank = Glass Lid C = Ceramic Lid "S" if special or custom design. Blank if Srd. SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified CX6VSM - Tray Pack -16mm tape, 7" or 13" reels (Reference tape and reel data sheet 10109) 10132 - Rev B S YS TEM CERTIFIC AT N IO STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com IS O 90 01 |
Price & Availability of CX6VSM1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |